简述遥感资源卫星系统及其应用

遥感资源卫星系统是一种高精度的获取各种地理信息的测量工具，它广泛适用于森林调查，大地测绘，土地资源详查、城市规划等领域，本文较详细地介绍了遥感资源卫星系统的组成及具体的应用情况。     

Power spectrum density and experimental modal analysis of wide belt sander applied in domestic wood industry

This paper took the upper-lower wide belt sander B229 with four-feet wide belts, manufactured in China, as the study target. By means of framework dynamic design, we study its vibration characteristics by commencing from the place having horizontal defects and used experimental modal analysis (EMA) and power spectrum density (PSD) to observe the sanding parts and the whole machine, respectively. In the modal test, we mainly adopted the cross spots testing method to get the frequency response function of the fixed spots to every excitation vibration spot, then applied the SISO frequency response function and the frequency response function fitting method to identify and complete parameter recognition, respectively. The typical frequency response function chart of the whole machine and its sanding parts, as well as its second-order mode charts of contacting roller, were obtained. Through PSD analysis, we can get the amplitude-frequency spectrum and drive frequency. Translated from Scientia Silvae Sinicae, 2005, 41(6): 132–137 [译自: 林业科学]     

机械传动系统扭矩及功率的动态测试（一）

针对目前林木及运输机械传递扭矩估算与实测值(均值)相差悬殊，本从实时检测动态扭矩及功率入手，提出中低速大扭矩及功率的数据采集方法。     

Wood Moisture Content Measurement by X-Ray Exposure Method

lNTRoDUCTIONTheon-sitcnon-dcstructit'cmcasurcl11cntofu.oodmoisbocontcntattTactsgrcatintcrcsts.Itpla3'simpor-tantpartsinthescicntificrcscarchsucl1asonthchcatandmasstransportproccssesint"ooddri'ing.thcim-pregnationofliquidinxt'ood.thcmoisturccontcntdistri-b…     

Delignification of cell walls of <Emphasis Type="Italic">Chamaecyparis obtusa</Emphasis> during alkaline nitrobenzene oxidation

To clarify the behavior of whole lignins in wood cell walls during alkaline nitrobenzene oxidation, the delignification process from cell walls in normal and compression woods of Chamaecyparis obtusa Endl. (Cupressaceae) was observed using ultraviolet and transmission electron microscopies. The lignin content conspicuously decreased to around 10% after 35min in normal wood. The lignin content in compression wood finally leveled off at aroumd 10% after 50min. In gel filtration of oxidation products in ethyl acetate, a high molecular weight fraction was prominent in extracts from the early stage of the reaction. As the oxidation progressed, the high molecular weight fraction became less prominent in both normal and compression wood. Changes in the weights of cell wall residues during reaction indicated that approximately half of the components other than lignin were also removed from the cell walls. This shows that the majority of lignin with relatively high molecular weight is removed from the cell walls together with polysaccharides in the early stage of the reaction and that further oxidative degradation occurs in solution in later stages. Only a small amount of the lignin with low molecular weight could be analyzed by gas chromatography.Parts of this report were presented at the 47th (Kochi, April 1997) and 48th (Shizuoka, April 1998) Annual Meetings of the Japan Wood Research Society, and at the Lignin Symposium, Sapporo, October 1997     

电力远程自动集中抄表系统

本文主要论述电力远程自动集中抄表系统的构成、特点以及系统的发展前景。     

Lignin Characterization of Triploid Clones of Populus tomentosa Carr.

In order to understand the structural characteristics of lignin in triploid clones ofPopulus tomentosa and its changes in the processes of pulping and bleaching, milled wood lignin （MWL）, lignin carbohydrate complex （LCC） and the residual lignin from kraft pulp （KP） and sulfite pulp （SP） were isolated and analyzed by Fourier transform infrared （FTIR） spectrum and ^13C nuclear magnetic resonance （NMR）. The most diagnostic peaks were assigned and the differences were discussed. The spectral patterns reveal that triploid P tomentosa shows the specific features of hardwood from temperate areas, but in the spectrum of FTIR, the strength ratio orAl270 cm^-1 to A1226 cm^-1 is 0.88, higher than the average of hardwood from temperate areas, which will make the lignin delignification more difficult during pulping and bleaching. The LCC from triploid P tomentosa is mainly composed of xyloglucan and glucuronic acid, and other glucides have much lower ratio. In LCC FTIR, there are three peaks at 1 427, 1 329 and 1 046 cm^-1, indicating that both semi-cellulose and cellulose could exist in LCC, and that there might be relationships between cellulose and lignin. Compared with the residual lignin from KP and SP, the condensed structure in KP is more than that in SP.     

国产人造板宽带砂光机功率谱密度和试验模态分析

以国产B229型四四砂架人造板双面宽带砂光机为研究对象,从易产生横纹缺陷入手,对其砂架部件、整机等分别采用试验模态分析(EMA)及功率谱密度法(PSD)来开展振动动态特性研究。在模态试验中,采取测量点固定、改变激振点的跑点测量方法,得到固定测量点对各激振点频响函数,并应用SISO频响函数识别法,通过频响函数曲线拟合来完成模态参数识别,获到典型的整机、砂架部件的频响函数图和接触辊的二阶振型图。通过PSD分析,获得砂光机的PSD图谱和激励频率等。     

杠杆压铊张紧系统带锯空转振动特性的分析

本文对杠杆压铊张紧系统带锯产生振动的原因,进行了试验和理论研究。用2034型频谱分析仪试验表明,带锯条振动属于复杂周期信号的离散型频谱,是由多个简谐振动叠加而成;同时理论考察分析表明,带锯条杠杆压铊张紧系统不同于秤量重物的“平衡秤”,不可能达到“静平衡”,而是在锯轮参数激振作用下形成周期性受迫振动。锯轮参数激振和杠杆压铊张紧系统位移激振之间交互作用,是使带锯条产生周期振动并引起张紧力发生变化的重要原因。